|
|
|
A BILL TO BE ENTITLED
|
|
AN ACT
|
|
relating to the monitoring of emissions from certain concrete |
|
plants. |
|
BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF TEXAS: |
|
SECTION 1. Section 382.05195, Health and Safety Code, is |
|
amended by amending Subsection (k) and adding Subsection (l) to |
|
read as follows: |
|
(k) An application for an authorization to use [the issuance |
|
of] a standard permit under this section for a concrete plant that |
|
performs wet batching, dry batching, or central mixing, including a |
|
permanent, temporary, or specialty concrete batch plant, as defined |
|
by the commission, must include a plot plan that clearly shows: |
|
(1) a distance scale; |
|
(2) a north arrow; |
|
(3) all property lines, emission points, buildings, |
|
tanks, and process vessels and other process equipment in the area |
|
in which the facility will be located; |
|
(4) at least two benchmark locations in the area in |
|
which the facility will be located; and |
|
(5) if the permit requires a distance, setback, or |
|
buffer from other property or structures as a condition of the |
|
permit, whether the required distance or setback will be met. |
|
(l) The commission shall prescribe reasonable requirements |
|
for the regular monitoring of the emissions of air contaminants |
|
from facilities described by Subsection (k) that regularly operate |
|
at or near any applicable hourly production rate maximum set by the |
|
applicable standard permit. |
|
SECTION 2. This Act takes effect September 1, 2025. |