By: McReynolds H.B. No. 1913
 
 
 
A BILL TO BE ENTITLED
 
AN ACT
  relating to identification requirements for certain fire hydrants
  and flush valves.
         BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF TEXAS:
         SECTION 1.  Section 341.0357, Health and Safety Code, as
  added by Chapter 684 (H.B. 1717), Acts of the 80th Legislature,
  Regular Session, 2007, is amended to read as follows:
         Sec. 341.0357.  IDENTIFICATION REQUIREMENT FOR CERTAIN
  [DEVICE WITH APPEARANCE OF] FIRE HYDRANTS AND FLUSH VALVES [HYDRANT
  THAT IS NONFUNCTIONING OR UNAVAILABLE FOR USE IN FIRE
  EMERGENCY].  (a) In this section, "hydrant" means:
               (1)  a fire hydrant; or
               (2)  a metal flush valve that:
                     (A)  has [The owner of any device having] the
  appearance of a fire hydrant; and
                     (B)  [that] is located in a place that an entity
  responsible for providing fire suppression services in a fire
  emergency would expect a fire hydrant to typically be located.
         (b)  Each public water system responsible for any hydrant
  shall:
               (1)  paint all or the caps of the hydrant white if the
  hydrant is available to be used only to fill a water tank on a fire
  truck used for fire suppression services; and
               (2)  paint all or the caps of the hydrant [device] black
  if the hydrant [device] is [nonfunctioning or otherwise]
  unavailable for use by the entity providing fire suppression
  services in a fire emergency.
         (c)  For purposes of Subsection (b)(2), a hydrant is
  unavailable for use in a fire emergency if it is unavailable for
  pumping directly from the hydrant or is unavailable for use in
  filling a water tank on a fire truck used for fire suppression
  services.
         (d)  A public water system [The owner] may place a black tarp
  over the hydrant or use another means to conceal the hydrant
  [device] instead of painting all or the caps of the hydrant [device]
  black as required under Subsection (b)(2) [this section] if the
  hydrant [device] is [temporarily nonfunctioning, or] temporarily
  unavailable for use in a fire emergency for a period not to exceed
  60 [seven] days. Not later than the 60th day after a hydrant is
  concealed as provided by this subsection, the public water system
  responsible for the hydrant shall:
               (1)  if the hydrant is functioning or otherwise
  available for the provision of fire suppression services, remove
  the tarp or other means of concealment; or
               (2)  if the hydrant continues to be unavailable for use
  in a fire emergency, paint the hydrant black as required by
  Subsection (b)(2).
         (e)  A public water system that paints a hydrant black as
  required by Subsection (b)(2) may also ensure by any reasonable
  means that the hydrant is identifiable in low-light conditions,
  including by installing reflectors.
         [(f)]  [(b)]     For purposes of this section, a hydrant
  [device] is considered to be nonfunctioning if the device pumps
  less than 250 gallons of water per minute.
         (f)  For purposes of this section, a hydrant is considered to
  be unavailable for use by an entity responsible for providing fire
  suppression services in a fire emergency if:
               (1)  the public water system is not obligated by
  ordinance, regulation, or contract to provide water for fire
  suppression services; or
               (2)  the public water system elects not to provide
  water for those services; or
               (3)  the hydrant delivered less than 50 gallons of
  water per minute during its most recent flow test under normal
  conditions.
         (g) [(c)]  This section does not apply:
               (1)  within the jurisdiction of a governmental entity
  that maintains its own system for labeling or color coding its
  hydrants; or
               (2)  to any public water system that has entered into a
  contract with a municipality or volunteer fire department to
  provide a water supply for fire suppression services if the
  contract specifies a different system for labeling or color coding
  hydrants [a device having the appearance of a fire hydrant that is
  nonfunctioning or otherwise unavailable for use in a fire
  emergency].
         (h)  For purposes of Subsection (g), a system for labeling or
  color coding hydrants may include the assignment of different
  colors to identify hydrants that are available for direct pumping,
  hydrants that are available for filling a water tank on a fire truck
  used for fire suppression services, and hydrants that are
  unavailable for use by an entity providing fire suppression
  services in a fire emergency.
         (i)  The fact that a hydrant for which a public water system
  is responsible under this section is not painted black as described
  by Subsection (b)(2) or concealed in the manner described by
  Subsection (d) does not constitute a guarantee by the public water
  system that the hydrant will deliver a certain amount of water flow
  at all times. Notwithstanding any provision of Chapter 101, Civil
  Practice and Remedies Code, to the contrary, a public water system
  is not liable for a hydrant's inability to provide adequate water
  supply in a fire emergency.
         SECTION 2.  Not later than January 1, 2010, each public water
  system responsible for hydrants under Section 341.0357, Health and
  Safety Code, as added by Chapter 684 (H.B. 1717), Acts of the 80th
  Legislature, Regular Session, 2007, and as amended by this Act,
  shall ensure that its hydrants comply with the requirements imposed
  by that section.
         SECTION 3.  This Act takes effect immediately if it receives
  a vote of two-thirds of all the members elected to each house, as
  provided by Section 39, Article III, Texas Constitution.  If this
  Act does not receive the vote necessary for immediate effect, this
  Act takes effect September 1, 2009.