Amend CSSB 357 (house committee printing) as follows:
(1) On page 1, strike lines 8-17 and substitute the following:
provided by this section, a sign may not be higher than 60 feet [This section applies only to a sign existing on March 1, 2017, that was erected before that date].
(2) Strike page 1, line 23, through page 2, line 6, and substitute the following:
than 85 feet [, excluding a cutout that extends above the rectangular border of the sign, measured:
[(1)
from the grade level of the centerline of the main-traveled way, not including a frontage road of a controlled access highway, closest to the sign at a point perpendicular to the sign location; or
[(2)
if the main-traveled way is below grade, from the base of the sign structure].
(3) On page 2, between lines 12 and 13, insert the following:
(d) For purposes of this section, the height of a sign:
(1) excludes a cutout that extends above the rectangular border of the sign; and
(2) is measured:
(A) from the grade level of the edge of the pavement of the main-traveled way, not including a frontage road of a controlled access highway, closest to the sign at a point perpendicular to the sign location; or
(B) if the main-traveled way is below grade, from the base of the sign structure.